Uniden SDS100 Volume Offset Feature

BAAS Amazon Store - https://www.amazon.com/shop/boyandascanner New Programming Guides, Manuals and Product Recommendations at the HQ https://boyandascanner.com NEW Glow Knobs at https://shop.boyandascanner.com Shop Uniden with my BAAS Partner Link (supports the channel at no cost to you) - https://uniden.com/baas What Volume Offset is Volume Offset lets you make one channel/talkgroup slightly louder or quieter compared to everything else, without changing your main volume knob. ​ It’s meant to level out channels that are naturally louder or quieter so you don’t constantly ride the volume knob. ​ When to use it One channel is always too loud (dispatch blows your ears out): set a negative offset (ex: -1 or -2). ​ One channel is always too quiet (a ham repeater is hard to hear): set a positive offset (ex: +1 or +2). ​ Works for both analog and digital channels because it’s an audio-level trim, not a reception setting. ​ Quick method on the scanner (fastest) Hold on the channel you want to adjust: press CHANNEL once (you should see Hold). ​ Press FUNC, then press 0 (LVL) to open Channel Volume Offset. ​ Use the on-screen prompt to change the value (you’ll see it cycle through a small range like -3 … 0 … +3). ​ Stop when you’re at the value you want. ​ Press CHANNEL again to resume scanning. ​ Menu method (more “official”) Use this if you prefer doing it through channel settings: Press MENU. ​ Go to Manage Favorites → choose your Favorites List → choose your System → choose your Department (or talkgroup list). ​ Select the Channel/Talkgroup you want to change and open Channel Options. ​ Scroll to Volume Offset and set it to the value you want. ​ Back out of the menu to resume scanning. ​ Recommended starting values Start with +1 if the channel is too quiet. ​ Start with -1 if the channel is too loud. ​ Only go to ±3 if it’s still way off.