(UPDATED) P320 MANUAL SAFETY CONVERSION TOOLKIT

In this UPDATED video I introduce the MSAFE-T kit for the P320 (available now through WWW.SIGMECH.STORE and other retailers) and review the step-by-step methods I use in order to convert a previously non-manual safety P320 so that it can accept a factory manual safety lever assembly with the same specs found on the M17 or M18 models. Please note that although the MSAFE-T kit will work to convert ANY non-manual safety FCU, the grip cutting tool however is specifically made for the X-Series (and T-TEN) grip modules. (Standard grip template coming in 2024!). CHAPTERS: 0:00 - Intro 2:59 - Disclaimer 3:40 - MSAFE-T Package Contents 5:20 - Required Project Tools 6:33 - Optional Project Tools 6:51 - Required PPE INSTALLATION: 7:28 - FCU Template Installation 13:41 - Grip Template Installation FCU: 19:02 - FCU Pre-Cutting Information 27:14 - FCU Cutting Process 29:22 - FCU Manual Safety Test Fitting 32:59 - Manual Safety Assembly Installation GRIP: 37:30 - Grip Pre-Cutting Information 39:28 - Grip Cutting Process 41:07 - Grip Module Troubleshooting POST WORK INFORMATION: 46:01 - FCU/Grip Test Fitting 46:47 - Outro FCU DISASSEMBLY: https://www.youtube.com/watch?v=bg-gidUmFYA&t=124s FCU REASSEMBLY: https://www.youtube.com/watch?v=bg-gidUmFYA&t=597s * The MSAFE-T Tooklit is designed by Sig Mechanics and sold through SIGMECH INC. All parts must be installed and inspected by a qualified gunsmith in accordance to all local, state and federal laws. By installing and/or using the MSAFE-T, you are agreeing to take full and complete responsibility for any and all legal, health and warranty consequences that may be incurred. INSTALL AT YOUR OWN RISK *