W6/ND-142 – Mount Perry

https://blog.benmook.com/w6-nd-142-mount-perry-w6-nd-144-dante-benchmark/ From Highway 190, take Dante’s View Road all the way to a large parking area. This is a pretty well known spot in Death Valley which offers stunning views of Badwater Basin and the Panamint Range. The summit of Dante Benchmark is just a short hike north of the parking area, and beyond that, Mount Perry, a little over 4 miles away on a well worn trail. Like most of my hikes, I got up to the trailhead later than I would have liked. From there I wasted no time getting on the trail and away from the tourists on the pavement. It only takes about 5 minutes (or less) to get to the first summit, but my plan was to activate the furthest one first. The trail to Mount Perry is easy to follow, but you loose about 1,000 feet of elevation on the way there, before climbing another 1,000 feet back up. Near the summit the trail is a bit of a scramble. See .gpx file below. Once at the top I had the whole mountain to myself. I setup an EFHW and worked 15M and 7M CW, no S2S. After exhausting the initial round of chasers I packed up and headed back to Dante Benchmark. https://sotl.as/summitRidges/W6/ND-142