Hello and welcome to my latest tutorial.
To make these earrings you will need -
• 0.8mm wire (20g), 2 x 10" (26cm)
• 0.315mm weaving wire (28g) 300cm (I wind mine onto a bobbin, but you can cut lengths as you go if you prefer)
• beads, 2 x 4mm, 2 x 3mm
• Jump ring, 8mm outside measurement (or whatever size you have handy)
I no longer put links to tools on here.
The tools I use are:
• Tronex needle nose pliers
• Tronex short round nose pliers
• Tronex razor flush cutters
• Beadsmith flat nose nylon jaw pliers
• Occasionally I use tronex bent nose pliers
• Occasionally I use heavy-duty wire cutters
• Occasionally I use xuron needle nose pliers
• Bobeeze bobbins (medium size with no extra weights)
My Etsy shop - https://www.etsy.com/uk/shop/KellyJonesJewellery
Facebook - https://www.facebook.com/kellyjjewellery
IG - kellyjjewellery
Thanks for watching x
Music is free from youtube;
Invisible Beauty - Aakask Gandhi
and
Steps - anno domini beats
