To align the display with the correct battery status, please follow these straightforward steps:
1. Power Down – Turn off your ebike.
2. Initiate – While turning on your ebike, simultaneously squeeze the right (rear) brake lever.
3. Access Settings – Within 5 seconds, while still holding the brake lever, press the up and down arrows together on your display remote. This will open the programming screen.
4. Navigate to P5 – Use the arrow down button until you reach the P5 setting, and tap the power button.
5. Update Value – Change the value from "16" to "8". Once done, hold down the power button until you return to the main screen.
6. Restart – Turn off your ebike, then turn it back on.
7. Calibration – Your display will adjust to the correct battery level within a minute of riding.
