Wireless robotic arm using gesture control

Flex sensors are sensors that change in resistance depending on the amount of bend on the sensor. They convert the change in bend to electrical resistance - the more the bend, the more the resistance value. They are usually in the form of a thin strip from 1"-5" long that vary in resistance from approximately 10 to 30 kilo-ohms. They are often used in gloves to sense finger movement. The Flex point Bend Sensor was developed through testing a thin potentiometer which would show analog feedback from finger movement. The bend-sensitive carbon-based ink was developed at that point. Flex sensors are used in gaming gloves, auto controls, fitness products, measuring devices, assistive technology, musical instruments, joysticks, and more. Our project deals with controlling a bionic/robotic arm with the help of motion sensing technology by Flex Sensors. The system is basically a master-slave system wherein the master motion sensing glove sits on hosts arm sensing motions of the finger and then using this data to control the servos which is sent over the Zigbee’s to control the movement of the slave bionic/robotic arm. CONTACT ON : 9503784350 , 02065001020.