ZERO 10X LCD Settings

In this tutorial, we teach you how to configure all the ZERO 8, 9, 10 and 10x LCD settings including the different fault codes of this e-scooter. The ZERO e-scooter has many functionalities that enable you to configure your ZERO scooter the way that best suits your needs. This tutorial only applies to the QS-S4 LCD throttle. Here are the extent of the settings: 1. P01 - LCD brightness level (1, 2, 3) 2. P02 - Mileage display in km or miles 3. P03 - Voltage level of machine (24, 36, 48, 52, 60V) 4. P04 - 1-60 mins before machine goes to sleep with inactivity 5. P05 - N/A 6. P06 - Wheel diameter in inches 7. P07 - No. of magnets on motor (Default 30) 8. P08 - Power Level (0-100) 9. P09 - Zero start or kickstart 10. P10 - N/A 11. P11 - Electronic braking on or off 12. P12 - Soft or high acceleration (1 is softest start; 5 is highest torque) 13. P13 and P14 - N/A 14. P15 - Controller cutoff voltage 15. P16 - Zero-ing of ODO 16. P17 - cruise mode 17. P18 to P20 - N/A For the fault or error code video, do check out https://youtu.be/Tnrttq77JjQ Fault Codes: 2 - brake 4 - 6kmh cruise 6 - battery undervoltage 7 - motor faulty 8 - throttle faulty 9 - controller faulty 10 - faulty comms between controller and LCD 11 - faulty comms between controller and LCD 12 - BMS failure 13 - headlight failure For more information on the ZERO series of e-scooter, please check out https://www.falconpev.com.sg.