Rudy's Hobby Channel

Autodesk Fusion 360 35 Pattern 3D (rectangular, circular, on path)

Rudy's Hobby Channel

Autodesk Fusion 360 34 Hole (counterbore, drill point, thread)

Rudy's Hobby Channel

Autodesk Fusion 360 33 Emboss (add material to a curved surface)

Rudy's Hobby Channel

Autodesk Fusion 360 32 Web (to strengthen a thin wall construction)

Rudy's Hobby Channel

Autodesk Fusion 360 31 Rib (to strengthen a construction)

Rudy's Hobby Channel

Autodesk Fusion 360 30 Loft (extrude along profiles)

Rudy's Hobby Channel

Autodesk Fusion 360 29 Sweep (extrude along a curve and twist)

Rudy's Hobby Channel

Autodesk Fusion 360 28 Revolve (creates round objects)

Rudy's Hobby Channel

Autodesk Fusion 360 26 Extrude Taper (narrow, widen)

Rudy's Hobby Channel

Autodesk Fusion 360 25 Extrude Operation (join, cut, intersect, new body, new component)

Rudy's Hobby Channel

Autodesk Fusion 360 24 Extrude Extent (distance, to object, all)

Rudy's Hobby Channel

Autodesk Fusion 360 23 Extrude Start Plane (profile, offset, object)

Rudy's Hobby Channel

Autodesk Fusion 360 22 Extrude Directions and Thin Extrude

Rudy's Hobby Channel

Autodesk Fusion 360 21 Extrude a Fidget Spinner

Rudy's Hobby Channel

Autodesk Fusion 360 20 Sketch Functions and Parameters in Dimensions

Rudy's Hobby Channel

Autodesk Fusion 360 19 Sketch Move Copy (and how to set the pivot point)

Rudy's Hobby Channel

Autodesk Fusion 360 18 Sketch Modify Tools (offset, trim, scale, and more ...)

Rudy's Hobby Channel

Autodesk Fusion 360 17 Sketch Fillet & Chamfer (equal, distance + angle, 2 distances)

Rudy's Hobby Channel

Autodesk Fusion 360 16 Sketch Dimensions (fully constrained, fully referenced)

Rudy's Hobby Channel

Autodesk Fusion 360 15 Sketch Constraints (limit degrees of freedom)

Rudy's Hobby Channel

Autodesk Fusion 360 14 Sketch Grid- & Inference Snapping (snap to grid or to POI's)

Rudy's Hobby Channel

Autodesk Fusion 360 13 Sketch Text (straight or on a curved path)

Rudy's Hobby Channel

Autodesk Fusion 360 12 Sketch Circular Pattern Tool (and how to edit an existing pattern)

Rudy's Hobby Channel

Autodesk Fusion 360 11 Sketch Rectangular Pattern Tool (and how to make a honeycomb)

Rudy's Hobby Channel

Autodesk Fusion 360 10 Sketch Mirror Tool (time saver for symmetrical objects)

Rudy's Hobby Channel

Autodesk Fusion 360 09 Sketch a Slot in 5 Ways (3 straight and 2 arc)

Rudy's Hobby Channel

Autodesk Fusion 360 08 Sketch a Conic Curve (hyperbola, parabola, ellipse)

Rudy's Hobby Channel

Autodesk Fusion 360 07 Sketch Splines in 2 Ways (smooth curved lines)

Rudy's Hobby Channel

Autodesk Fusion 360 06 - Sketch an Ellipse (Center, Length, Witdh)

Rudy's Hobby Channel

Autodesk Fusion 360 05 Sketch a Polygon in 3 Ways (circumscribed, inscribed, edge)

Rudy's Hobby Channel