Darren Drew

Removing masking tape easily.

Darren Drew

Making a fast, easy fret crowning tool.

Darren Drew

Epoxy resin top.

Darren Drew

gluing on the knotty cedar boards for a table top.

Darren Drew

October 29, 2023

Darren Drew

installing knotting tung and grove boards on the inside of your house.

Darren Drew

Scraping finish off the binding

Darren Drew

Touching up spots as you are doing a finish.

Darren Drew

Fret job complete.

Darren Drew

Polishing frets

Darren Drew

Dressing the fret ends.

Darren Drew

Checking with a rocker to find high spots on the frets.

Darren Drew

Leveling and crowning frets

Darren Drew

Filling in chips on the fret board from fret removal.

Darren Drew

Flush cutting and beveling fret ends.

Darren Drew

Pressing in frets with a drill press.

Darren Drew

Sanding blocks and technique.

Darren Drew

Polished fret board before installing the frets.

Darren Drew

Radiusing a fret board.

Darren Drew

Preparing a fret board to radius.

Darren Drew

Removing frets my way.

Darren Drew

Finished from filling in bad route.

Darren Drew

Top and nut plugs

Darren Drew

Filling in the locking nut holes

Darren Drew

Gluing in the blocks to fill in the top of this repair.

Darren Drew

Routing the top of the curve top guitar.

Darren Drew

finished on the back side of plug.

Darren Drew

Sanding down wood block I installed to fill in hole.

Darren Drew

installing the wood blocks to fill in the trem hole

Darren Drew

Routing out preparing to fill with solid block.

Darren Drew