>>Fabe<<

DIY Pinball – Part 9 applying the Overlay

>>Fabe<<

DIY Pinball – Part 8 Finalizing the Playfield & Overlay Preparations

>>Fabe<<

DIY Pinball - Part 7 - adding the 6 & 3 Drop Target Asseblies

>>Fabe<<

Autoloader Sub Bord for the Drop Target

>>Fabe<<

DIY Pinball - Part 6 - adding Spinning and Inline Drop Targets and Ball Gates.

>>Fabe<<

DIY Inline Drop Target - Instructions

>>Fabe<<

DIY Pinball - Part 5 - Bally Fathom Replica - adding Rails, Bumpers & Posts, ...

>>Fabe<<

DIY Pinball - Part 4 - Bally Fathom Replica - adding Posts, Rails, Rubbers, ...

>>Fabe<<

DIY Bumper assembly instructions

>>Fabe<<

DIY Pinball - Part 3 - Bally Fathom Replica - Flippers, Slighshot & kickout Hole

>>Fabe<<

DIY Pinball - Part 2 - Bally Fathom Replica - lamps, sensors and inserting them into the playfield

>>Fabe<<

DIY Pinball - Part 1 - Bally Fathom Replica - milling the playfield

>>Fabe<<

Pinball Kickout Hole

>>Fabe<<

Pinball Slingshot PCB (Printed Circuit Board) check

>>Fabe<<

Pinball Flipper PCB (Printed Cuircuit Board) Check

>>Fabe<<

DiY Pinball Sensor and Lamp Assembly

>>Fabe<<

Pinball Lamp Driver Board with MCP23017 IO Port expander

>>Fabe<<

inductive versus ultra violett Pinball Sensor

>>Fabe<<

DIY Bumper PCB Test Procedures

>>Fabe<<

Pinball Scale DropTarget Assembly

>>Fabe<<

DIY 3D printed pinball - Flipper close up and instructions

>>Fabe<<

DIY Pinball - Playfield with housing

>>Fabe<<

DIY 3D printed pinball machine - housing

>>Fabe<<

DIY 3D printed pinball - Slingshot close up

>>Fabe<<

DIY 3D printed pinball machine - Testplay with Controller & Sound- Part 6

>>Fabe<<

DIY 3D printed pinball machine - Solenoid Protection

>>Fabe<<

DIY 3D printed pinball - bumper close up

>>Fabe<<

DIY 3D printed pinball machine - Testplay without Controller- Part 5

>>Fabe<<

DIY 3D printed pinball machine - Overlay aplied - Part 4

>>Fabe<<

DIY 3D printed pinball machine - LampTest - part 3

>>Fabe<<