3DPrintRV Motion Sensing LED Lights

Is your caravan or camper awning light blinding you? Our LED awning lamp is the solution! Includes 3DprintRV adaptor plate that allows direct mounting of lamp in same position as original (NO DRILLING) Three brightness settings! Three colour settings (White, warm white & orange to keep the bugs away!) Simple touch switch operation (simple!). LEDS are angled down so they’re not shining directly in your eyes! Passive infrared movement sensor to automatically turn the light on at night (Can be deactivated)! IP67 ingress protection (water & dust proof)! Stainless steel Nyloc hardware supplied! Can be switched off at light itself (have to run through all colour modes) or switched off by caravan light switch. Lamp saves last setting when power removed. Turns back on with same settings. Detailed fitting & operation instructions supplied. Compatible with Jayco awning lights fitted to campers & other caravans (check dimensions for suitability) * Fitting is really easy! Remove the old lamp. Connect the wires to the new lamp. Screw the adaptor plate in place (uses same mounting holes!) Bolt the new LED lamp to the adaptor plate. Detailed fitting & operation instructions are supplied. Check them out here: https://www.3dprintrv.com/products?category=LED%2FLIGHTING NOTE: 3DprintRV LED adaptor plates are protected by design registrations.