How to load the Baum 1620PFF feeder. Go to the machine console push on lower table. Let the table come down until you reach the height you want, or you can let the table go all the way down and the stop switch will stop it. Make sure you don't have anything sitting under your table. You can hit stop anytime before that. You can remove the side guide so it is not in your way. Your side guide should be set at half the width of your paper if you are doing center feed. Load your paper. Put your other side guide back on and raise your table back up. Made sure that the pins at the back are set correctly. The pin with red rubber bumper should set on the top of the paper stack. The other should sit on the table. Make sure you do this on back sides.
