BLENDER: PRINTER (MODELING)

Part 2 of modeling the PRINTER. We fix the button issue (ie. removing them from the left side), add some rectangular holes on the front and back as well as another inset line on the back. We make the power button and create some details behind the front main tray. By the end of this video, we are quite far along in the modeling. We really only have the detail on the top tray and the back electrical components. Thanks very much for your interest in this series and if you are modeling the printer along with me and you need the reference image, please remember that it was initially created by Pawel Dudek and you can find it here: Reference Image: https://cdnb.artstation.com/p/assets/images/images/000/559/583/large/pawel-dudek-dl-printer.jpg?1426760064 ***************** Watch all my videos on modeling a PRINTER Part 1: https://youtu.be/bNYC-pzpONU (Introduction) Part 2: https://youtu.be/ZcVhKDBckkI (Modeling) Part 3: https://youtu.be/k6SeT_PFNpQ (Modeling) Part 4: https://youtu.be/aHEP06aVqIA (Modeling) Part 5: https://youtu.be/c_38VDDwaCQ (Texturing) #blenderbeginner #blendermodeling #blendertutorial