DEVI Smart App General Settings Overview

DEVI Smart App General Settings Overview: When you open the app, tap the button in the upper left corner or swipe right to open the left sidebar, where you’ll find a list of general settings. The first button is “Status,” where you can view any errors with your thermostats along with descriptions of each issue. The second button is “Schedule.” This opens the schedule menu, where you can set up a schedule for either the entire living zone or individual rooms. You can configure up to five time periods for one day. After choosing the desired time periods, you can copy and apply them to other days. You may set different periods for each day of the week. At the bottom of the schedule menu, you can toggle manual mode on or off. Manual mode disables the schedule and maintains a constant temperature throughout the day. The third button is “Settings.” The first section is called “Heating System Locations.” * “Edit Rooms” allows you to rename rooms. * “Edit Houses” allows you to rename the house. * “Share the House” lets you share your house with other people, so it will appear on their devices, enabling them to manage your thermostats. * “Receive House” allows you to add another house to your app and manage its thermostats. * “Add Thermostat” lets you add a new thermostat to your house. * “Users” shows a list of people with access to manage your house. You can remove users from this list. The next section is “System Information.” Here, you can turn notifications on or off, view system information, or read the privacy policy. The fourth button is “On/Off Devices,” which lets you turn thermostats on or off remotely. The fifth button is “Help.” This directs you to a page with answers to frequently asked questions about the app. DEVIreg Smart Thermostat Settings Overview: When you open the app, tap the button in the upper right corner, or swipe left to open the right sidebar. Here, you’ll find a list of added/installed thermostats. For each thermostat, you can see the current measured temperature, the heating system status, and the set temperature under the room name where the thermostat is located. If you select a room name, you will open the thermostat settings. The first section is “Temperatures,” which allows you to adjust the maintained temperature for different modes. The second section is “Schedule,” where you can enable or disable the schedule planner or adjust time periods. The third section is “Settings,” where you can toggle additional features like “Screen Lock,” “Open Window Detection,” or “Forecast.” This section also contains “Advanced Settings.” If you tap on it, a list of the thermostat’s settings will open. * “Floor Configuration” lets you set minimum and maximum floor temperatures and turn the minimum floor temperature function on or off to protect against low temperatures. * “Advanced Temperatures” lets you adjust temperatures for modes like “Vacation” or “Frost Protection.” * In the “Notifications” section, you can set a temperature threshold to receive alerts if the temperature falls below the set level. * In “Power Options,” you can remotely turn the thermostat on or off. * At the bottom of the list, you’ll find “Technician Setup” and “Factory Reset.” - “Technician Setup” lets you adjust initial thermostat settings. - “Factory Reset” allows you to reset your thermostat remotely. The fourth section, “Brightness,” lets you adjust the brightness of the Smart Display. The fifth section is “About,” where you can find information about the thermostat, such as its serial number, hardware, and software versions. Selecting “More Information” will display a complete list of all settings available for this thermostat