Gog Folder installation instructions

https://ebay.us/m/faoyqZ https://ebay.us/m/faoyqZ Gog Folder Installation Instructions 1. Remove the existing handle bolts Using a 3 mm Allen key, remove the four bolts from the base of the handle. Set these bolts aside — they are not reused. 2. Install the lower folding section Place the lower folder over the shaft’s plastic moulding. Make sure the plastic threaded section faces away from the arm cup, toward the coil. Secure it using the four long screws provided, with a 2.5 mm Allen key. 3. Install the upper folding section Fit the upper folder onto the handle. The plastic threaded section should be positioned behind the screen. Secure it with the four short countersunk bolts, using a 2.5 mm Allen key. 4. Join the handle to the lower folder Slide the handle assembly into the lower folder hinge until it clicks and locks into place. Push the handle forward so the plastic threads on both folder sections line up. 5. Fit the plastic nut Separate the plastic nut into its two halves. Place both halves in front of the handle assembly, ensuring the flat rear face of the nut points away from the threaded section of the folder. Slide the two halves together around the shaft. 6. Secure the folding mechanism Screw the plastic nut onto the folder threads. Tighten it to lock the upper and lower folder sections together, securing the handle in place.