Polycom Phone Installation Made Easy | Ethernet Cable Setup Guide

Ready to install your phones? We have already tested them to make sure they are delivered to your office ready to be plugged in. Each phone will come with the following: (1) Power cord (1) Receiver cord (1) Ethernet cable (1) Receiver (1) Phone stand You must provide the USB wall adapter to charge your device using the power cord. In this quick step-by-step video, we show you how to install your Polycom phone using the included Ethernet cable and power cord. Whether you’re setting up a new office or replacing existing hardware, this guide will walk you through every connection to get your Weave phone up and running in minutes. 📌 What You’ll Learn: • How to connect your phone using an Ethernet cable • Where to plug into the wall outlet • How to pair your phone with a computer • Tips if using a Firestick Ethernet adapter or similar equipment No IT support required—follow along and you’re good to go. 👉 Ready to upgrade your communication system? Book a Demo Today! https://www.getweave.com/demo/ How to install your phone: Begin by unpacking the phone and confirming that the phone has all the needed parts (see list above). Then, proceed to set up the receiver: -Take the receiver cord and plug it into the back of the phone in the Handset port -Plug in the other end to the receiver and place the receiver in its cradle -Find the Ethernet port plugged into your computer and disconnect it from your computer -Take the Ethernet cable that you just disconnected from your computer and plug it into the LAN port in the back of the phone - the one that looks like a field goal post -Take the Ethernet cable that came with the phone and plug it into the open port on the back of your phone -Plug the other end of the Ethernet cable into the Ethernet port on the back of your computer where you unplugged the previous cable Click here to download a printable guide on how to use your new phone: https://www.weavehelp.com/hc/en-us/articles/360062425571-Phone-User-Guides-Printable #PolycomPhoneInstallation #EthernetCable #OfficeSetup #WeaveTutorial #VoIPPhone #SmallBusinessTech