Radar user guide

00:03 Screen Switch Press the S1 to switch the screen. Sequence: LETTER → RANO → DOT → SECOND → ICON → DATE 00:23 Time & Date Adjust On this display screen, long-press the S2 button to enter adjustment mode. S2 = Confirm button, S1 = Adjust button. Press S1 to adjust the value; Press S2 to proceed to the next adjustment setting. Adjustments proceed sequentially: Hour -Minute-Year -Month-Date 01:07 Six Core Read 1. Letter Display Spell out the current time directly in English words for instant reading. 2. Rando Hour Hand: Bottom number column (all letters in a column will light up). Minute Hand: Side number column (all letters in a given row will light up). 3. Dot Matrix Coordinate Display Dot Pattern Animation: The corresponding letters "fly in" from the bottom/sides to the target position. Hour Hand: Bottom letter column (A - L) Second Hand: Side letter column (S - Z) 4. Second Mode Function Switch to Watch Mode: Via the MODE button. Press Start to begin timing. During the stopwatch timing period, the screen remains constantly lit, with a maximum continuous brightness duration of 60 seconds. After 60 seconds, the screen automatically turns off to save power while continuing to run in the background. The screen can be activated again by raising your hand or pressing a key. The display screen shows the current cumulative time. Press Start again to stop the timer. The watch has a maximum timing duration of 499 seconds. For every additional 100 seconds, the corresponding letter light on the watch face lights up. 5. Icon Display Mode Time Display: A/P (A = Morning, P = Afternoon). Hour Hand: The number is represented by the single letter at the bottom end of the letter. Minute Hand: The two-digit image is formed by combining the letters. 6. DATE Display Date Letter Turns On Month: The single letter on the bottom tray corresponds to the numerical value. Minute Hand: These two numerical images are formed by combinations of letters. #benlywatch #radar #watchlover #watchteach #watchcommunity #1970s