Spike Replacement for Begode Pedals

I tried giving the stock pedals a try but they were just too slippery. If you don't want to drop a lot of money on fancy spiked pedals, give this easy mod a try. All you need is a M4 x .7 tap, a #30 or 1/8" drill, and some spikes or your choosing. The hardware store should have the tap and I bought my spikes from amazon: https://a.co/d/4jV0f30 You can get an actual tap wrench or handle if you want or 3d print some models online. I used this one: https://www.printables.com/model/274984-m4-thread-tap-wrench-filetage-m4-tourne-a-gauche Here is the table I use: https://www.harborfreight.com/folding-clamping-workbench-with-movable-pegs-47844.html Follow me on Komoot to see all my adventures and the historical points that I stop at during my rides. https://www.komoot.com/user/1423707589907 I sell 3d printed topographical maps of GPS routes. You can check it out at https://www.instagram.com/3droutetopography/ I can make one for any route you give me so please reach out! I enjoy making them. Join us and buy a wheel at: https://www.ewheels.com/flyboy. Using this affiliate code gives me a little something at no cost to you. Thanks for your support! Check out my links page to all the gear that I use: https://docs.google.com/document/d/1jFQ3-CpD-7g6b9H2crXPJMOwDDDivuRDF7R2TY8f154/edit?usp=sharing