Step 6 - Disassembly

Trace Analytics, LLC www.AirCheckLab.com Transcript: For the proper disassembly of the LPC, follow these steps: To turn off the LPC, press and hold the black power button for 5 seconds until the machine turns off. Pressing and immediately releasing the button will begin a new sample. This could harm the machine if it is done after the silver isokinetic probe is reattached. 2. Detach the clear hose from the top of the LPC. Remove the silver inlet barbed fitting. Replace the silver kinetic probe onto the top of LPC. 3. Unplug charging cord and USB Thumb Drive from LPC and return all pieces to case. 4. Detach the clear tubing from the High Pressure Diffuser. Return black cap to High Pressure Diffuser. 5. Detach black tubing from High Pressure. Screw on silver cap. 6. Remove black tubing from air sampling point. Place tubes back into box for return. 7. Place High Pressure Diffuser into case for return shipment.