TI IoT Week, Sensor Node Project Part 2

Adding the Texas Instruments TMP275 for temperature measurement. Celebrating TI IoT week, I am building an IoT node that will monitor the Temperature and Light Levels of wherever you place it. Based on TI products of course and will be built upon the foundation of a TI Launchpad. Adding components and sensors day by day, culminating with a fully working IoT node that will post the data upto an MQTT server (The Cloud) and provide you with the means to subscribe to that data and present it in a useful way on a Smart device via an HTML5 browser. In this video we will select the TI temperature sensor from the many that I already have . If you want to replicate this project, it should not cost you more than 50-80$ depending on your current parts and options you choose. The launchpad selected for this project is the CC3200. http://www.ti.com/ww/en/launchpad/launchpads-connected-cc3200-launchxl.html#tabs TI Temperature sensors shown are as follows TMP006 http://www.ti.com/lit/ds/symlink/tmp006.pdf TMP107 http://www.ti.com/lit/ds/symlink/tmp107.pdf TMP108 http://www.ti.com/lit/ds/symlink/tmp108.pdf TMP275 http://www.ti.com/lit/ds/symlink/tmp275.pdf TMP175 http://www.ti.com/lit/ds/symlink/tmp175.pdf I would like to thank Texas Instruments for their support and sponsorship with this project Other videos for this series can be found here:- Day 1 https://youtu.be/im-ip8ZAXjY Day 2 https://youtu.be/QfE8kPg5cWk Day 3 https://youtu.be/feak2L_gM_w Day 4 https://youtu.be/AwO9qjMBsiE Day 5 https://youtu.be/5RdPFRs1cAc Day 6 https://youtu.be/f48pHgzB6VE Day 7 https://youtu.be/fpYWajndIOQ