In my attempt to perform a burn-in session with my new TOMY Enterprise Refit's lighting system, I broke the Action-Control Thrusters.
I wanted to make sure that my TOMY Enterprise Refit's lighting system would last past the warranty period, I performed a 24-hour Burn-in test. All was well for the first 6 hours, but I noticed that after the second 6 hours were through, the Action-Control Thrusters was now turned off once the ship went into warp drive.
I spent the next 20 minutes going through all the different settings for the lights until finally, I stumbled across it... don't ask how I fixed it. 😄
BTW: For those helpful people whose dedicate their life in pointing out the obvious... Yes, I know there is a light leak on the saucer section. 🖖🤣
