Ultimate Universal puzzle controller - MODE 6 - SIMON SAYS

In SIMON SAYS mode, the controller shows a sequence that gets longer after each successful repetition. Players must follow along, repeating increasingly longer patterns until the full sequence is recreated. USB: Recommended Speakers: Recommended Sensor Modification: Required For sensors to light up and show the pattern, you must modify the output diode wiring. Modification Steps: 1. Use a screwdriver to remove the wire from the "GND INPUT" slot on the sensor. 2. Insert that same wire into the "GND OUTPUT" slot. 3. Screw it tightly. Best Use Cases: - Classic Simon Says memory game - Pattern matching with colored buttons - Musical sequence games - Memory challenges Setup Instructions: 1. Modify compatible sensors for output diode (see above). 2. Connect USB drive and speakers. 3. Press and hold the Teaching button until the number 6. appears on the display. 4. Release the Teaching button. 5. Trigger sensors in the desired sequence (you can use each sensor more than once). 6. Press the Teaching button to confirm the sequence. How It Works: When any sensor is triggered, the game starts. The first sensor in the sequence lights up briefly. Players must trigger that sensor. Then the first AND the second sensors light up in sequence. Players must repeat both in order. This continues, adding one step each round, until the full sequence is completed. If players make a mistake, the game restarts from the beginning. Example Puzzle: The sequence is Red-Blue-Green (3 steps): Red lights up. Player presses Red. Red lights up, then Blue. Player presses Red, Blue. Red lights up, then Blue, then Green. Player presses Red, Blue, Green. Puzzle solved (won! Output sets activate.