Will Henry's Workshop

922 subscribers

72 videos

For many years I made a living as a professional gunsmith. During those years, I became accustomed to the presence of a bunch of guys who liked to stand arou...

Latest Videos

73. Re-contouring a barrel to change the balance of the rifle.

72. Removing clip-charger hump on a 98 Mauser

71. A 303 Ruger 77. Just for fun

70. Hardening the cocking cam on a Mauser bolt

69. Discussion of bolt alignment

68. Fitting bolt with dovetailed inserts and bushing.

67. Cutting dovetails in the 40X bolt

66. Neck turning

64. Milling and filing the front of the barrel for the front sight base

63. Some BS and starting on an interesting recontouring job.

62. A little about the Model 70 safety and bolt

61. Getting back in the shop after the Tack Driver

60. Bedding the Remington 700 into the Macmillan stock

59. Checking the bedding on a rifle and determining the next step.

58. Getting sidetracked

57. Starting on the bolt for the 40X

56. Finishing the receiver work on the 40X

55. Continuing with the 40X receiver.

54. Truing up and improving a Remington 40X Action

53. finishing the chamber and throating

52. Chambering in the steady rest

51. Threading the HWP barrel between centers.

50. Testing a new microphone and a newly discovered camera setting.

49. Bedding finished.

48. Troubleshooting an accuracy problem

47. Cutting and crowning.

46. Barrel Marking

45. The Kimber 223 underway.

44. Just some Will Henry BS

43. A 375 Ruger on a McMillan action